首页 | 本学科首页   官方微博 | 高级检索  
     

硫酸烧渣还原浸取铁
引用本文:金程,李登新.硫酸烧渣还原浸取铁[J].有色金属(冶炼部分),2012(1):9-12.
作者姓名:金程  李登新
作者单位:东华大学环境科学与工程学院,上海,201620
基金项目:国家高技术研究发展计划(863)项目(2006AA06Z132);上海市重点学科建设项目(B604)
摘    要:采用硫化物作助剂还原浸出硫酸烧渣中的三价铁。采用L9(43)四因素三水平正交试验,考察助剂用量、硫酸用量、温度、时间对浸出效果的影响,并确定最佳配比。结果表明:影响的显著顺序为助剂用量>时间>硫酸用量>温度。在下述最佳条件下铁浸取率可以达到87.8%:起始液固比2∶1、搅拌转速1 300r/min、助剂用量17.2g、硫酸23mL、85℃反应3h。

关 键 词:硫酸烧渣  还原酸浸  硫化物    正交试验
收稿时间:7/8/2011 12:00:00 AM

Reductive Leaching of Iron from Sulfate Slag
JIN Cheng,LI Deng-xin.Reductive Leaching of Iron from Sulfate Slag[J].Nonferrous Metals(Extractive Metallurgy),2012(1):9-12.
Authors:JIN Cheng  LI Deng-xin
Affiliation:School of Environmental Science and Engineering, Donghua University, Shanghai 201620, China
Abstract:The ferric iron was reductive leached from sulfate slag with sulfide.The effects of leaching agent dosage,sulfuric acid consumption,reaction temperature and time on leaching rate of iron were investigated with L9(43) orthogonal test.The results show that the sequence of effecting is leaching agent dosage,reaction time,sulfuric acid consumption and reaction temperature.The iron leaching rate reaches 87.8% on the following optimum conditions: ratio of liquid to solid of 2∶1,stirring rate of 1 300 r/min,leaching agent dosage of 17.2 g,sulfuric acid consumption of 23 mL,leaching temperature of 85 ℃ and leaching time of 3 h.
Keywords:sulfate slag  reductive leaching  sulfide  iron  orthogonal test
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号