质量约束的三维模型建模方法 |
| |
作者姓名: | 卜宁远 谢宇洋 |
| |
作者单位: | 上海理工大学机械工程学院 |
| |
摘 要: | 在当今的智能制造和工业软件设计领域,CAD和CAE是极为重要的技术.但现有的CAD和CAE模型表示方法不统一,在数据交换上需要耗费大量时间,造成了计算资源极大的浪费.非均匀有理B样条(NURBS)模型作为一种兼容CAD和CAE的模型表达方式,以样条曲线为基函数,无须进行交换即可进行等几何分析.本文提出了一种基于质量约束...
|
关 键 词: | NURBS 建模方法 等几何分析 |
3D Modeling based on Mass Dependence |
| |
Authors: | BU Ningyuan XIE Yuyang |
| |
Affiliation: | (School of Mechanical Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China) |
| |
Abstract: | CAD(Computer Aided Design)and CAE(Computer Aided Engineering)are extremely important technologies in today's intelligent manufacturing and industrial software design fields.However,representation methods of the existing CAD and CAE model vary,and it consumes a lot of time to exchange data,resulting in a great waste of computing resources.Non-uniform rational B-spline(NURBS)model,as a model expression compatible with CAD and CAE,takes spline curve as the basis function,and can perform isogeometric analysis without exchange.This paper proposes a NURBS modeling method based on mass dependence,which takes model mass as a constraint during modeling,so that the constructed model meets the requirements of isogeometric analysis.This paper takes a model with a complex connected domain as an example to perform isogeometric analysis.Compared with popular commercial software,the minimum value is the same,the maximum error is within 10%,and the running time decreases by 4.61%,which verifies the correctness of this method. |
| |
Keywords: | NURBS modeling method isogeometric analysis |
本文献已被 维普 等数据库收录! |
|