| Abstract: | The dependency of the efficacy of an alternating‐current surface‐discharge plasma‐display panel (PDP) on the gas pressure was investigated for several Xe‐Ne gas mixtures. Also, the sustain voltage was varied. Monochrome 4‐in. test panels, with a design which resembles the one used in mainstream commercial products, were used. The experimental panel efficacy and emission characteristics were compared to the results of a numerical discharge model. A strong increase in the efficacy for increasing voltage was found in high‐gas‐pressure mixtures with a high Xe concentration. An increase in the electron‐heating efficiency and of the Xe‐excitation efficiency contribute, about equally, to the increase in efficacy. The increase in the Xe‐excitation efficiency is due to an increase in the excitation in the lower Xe levels induced by a lowering of the electron temperature. The contribution of the increasing Xe‐dimer radiation fraction to the efficacy improvement is relatively small. These results imply an efficient panel design comprised of the combination of a high Xe concentration, a high gas pressure, and a high sustain voltage. A high luminance and a high efficacy are concurrent for such a design. A 4‐in. test panel containing a mixture of 13.5% Xe in Ne at 800 hPa has been realized, demonstrating a white luminance of 2600 cd/m2 and an efficacy of 3.1 lm/Wfor continuous operation at 50 kHz and 230 V. |
