Modelling and Simulation on the Effect of Hot Forming Damage on Three-Point Bending Performance of Beam Components |
| |
Authors: | Weimin Zhuang Pengyue Wang Yang Liu Dongxuan Xie Hongda Shi |
| |
Affiliation: | State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China;FAW-Volkswagen Automotive Co., Ltd., Changchun 130011, China |
| |
Abstract: | The effects of forming damage are analyzed, which occur during hot stamping process, on the load-carrying capacity and failure mode of hot stamped beams. A damage-coupled pre-forming constitutive model was proposed, in which the damage during hot stamping process was introduced into the service response. The constitutive model was applied into the three-point bending simulation of a hot stamped beam, and then the influences of forming damage on the load-carrying capacity and cracks propagation were investigated. The results show that the forming damage reduces the maximum load capacity of the hot stamped beam by 7.5%. It also causes the crack to occur earlier and promotes crack to propagate along the radial direction of the punch. |
| |
Keywords: | constitutive modelling hot-stamped beam forming damage three-point bending crack propagation |
|
| 点击此处可从《北京理工大学学报(英文版)》浏览原始摘要信息 |
|
点击此处可从《北京理工大学学报(英文版)》下载全文 |