| 低频振动场对HDPE性能的影响 |
| |
| 引用本文： | 李又兵,申开智. 低频振动场对HDPE性能的影响[J]. 合成树脂及塑料, 2007, 24(4): 52-54,63 |
| |
| 作者姓名： | 李又兵 申开智 |
| |
| 作者单位： | 重庆工学院材料科学与工程学院,四川,重庆,400050;四川大学高分子科学与工程学院高分子材料工程国家重点实验室,四川,成都,610065;四川大学高分子科学与工程学院高分子材料工程国家重点实验室,四川,成都,610065 |
| |
| 基金项目： | 国家自然科学基金(50473053，10590351)，重庆市科委资助项目(2006BB4396) |
| |
| 摘 要： | 利用低频熔体振动注射成型技术获得自增强高密度聚乙烯。实验结果表明,采用振动注射成型工艺,试样屈服拉伸强度由26.5MPa提高到36.1MPa;试样的芯层中可获取沿流动方向生成的串晶或行式排列的片晶结构;压力振动注射有利于分子在(110)晶面择优取向,使结晶更加完善;振动注射提高了试样的结晶度,芯层结晶度最大提高了10.2%。
|
| 关 键 词： | 压力振动 注塑成型 高密度聚乙烯 形态 自增强 |
| 文章编号： | 1002-1396（2007）04-0052-04 |
| 修稿时间： | 2007-03-032007-04-30 |
Effect of low frequency vibration field on properties of HDPE |
| |
| Li Youbing,Shen Kaizhi. Effect of low frequency vibration field on properties of HDPE[J]. China Synthetic Resin and Plastics, 2007, 24(4): 52-54,63 |
| |
| Authors: | Li Youbing Shen Kaizhi |
| |
| Affiliation: | 1. College of Material Science and Engineering, Chongqing Institute of Technology, Chongqing 400050, China; 2. College of Polymer Science and Engineering, the State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu 610065, China |
| |
| Abstract: | Self-reinforced high density polyethylene articles were prepared with low frequency melt vibration injection molding technique.The experimental results show that the yield strength of the specimen rises from 26.5 MPa to 36.1 MPa owing to the adoption of the technique.The shish-kebab structure and/or row-nucleated lamella structure form along the flow direction in core region of the specimen.Vibration injection molding significantly favors the preferred orientation of molecular chains on(110)crystal plane and makes the crystalline more perfect.In addition,vibration injection molding raises crystallinity of the specimen,as exemplified by the increment up to 10.2% of crystallinity in the core region. |
| |
| Keywords: | pressure vibration injection molding high density polyethylene morphology self-reinforcement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
