| 扩散焊接法制备Pb-Al复合电极材料的性能 |
| |
| 引用本文： | 梁方,竺培显,周生刚,马会宇.扩散焊接法制备Pb-Al复合电极材料的性能[J].材料热处理学报,2012,33(1):21-25. |
| |
| 作者姓名： | 梁方 竺培显 周生刚 马会宇 |
| |
| 作者单位： | 1. 昆明理工大学材料科学与工程学院,云南昆明,650093
2. 昆明理工大学材料科学与工程学院,云南昆明650093／云南省新材料制备与加工重点试验室,云南昆明650093 |
| |
| 基金项目： | 国家高技术研究发展计划“863”计划(2009AA032512) |
| |
| 摘 要： | 采用扩散焊接法制备出了Pb-Sn-Al复合电极材料。借助线形扫描伏安法(LSV)、SEM测试手段研究了不同工艺参数对Pb-Al复合材料界面及电化学性能的影响。结果表明,在230℃、2 h或1 h下扩散焊接条件下,得到了界面冶金式结合的Pb-Al复合材料;与液固包覆法制备的电极材料相比,界面结合明显改善;与传统Pb电极相比,槽电压降低40 mV,极化电位降低4%。
|
| 关 键 词： | Pb-Al复合电极材料 扩散焊接法 界面演变 电化学性能 |
Properties of PbAl composite electrode material prepared by diffusion welding |
| |
| LIANG Fang,ZHU Pei-xian,ZHOU Sheng-gang,MA Hui-yu.Properties of PbAl composite electrode material prepared by diffusion welding[J].Transactions of Materials and Heat Treatment,2012,33(1):21-25. |
| |
| Authors: | LIANG Fang ZHU Pei-xian ZHOU Sheng-gang MA Hui-yu |
| |
| Affiliation: | 1(1.Faculty of Materials Science and Engineering,Kunming University of Science and Technology, Kunming 650093 China;2.Key Laboratory of Advanced Materials of Precious-Nonferrous Metals, Kunming University of Science and Technology,Kunming 650093,China) |
| |
| Abstract: | Pb-Sn-Al composite electrode materials were prepared by diffusion welding.Influence of different parameters on the interface and electro-chemical properties of the Pb-Al composites was studied by linear sweep voltammetry(LSV) and SEM.The results show that Pb-Al composites with metallurgically bonded interface is obtained by diffusion welding at 230 ℃ for 1 h or 2 h.Compared with the electrode material prepared by liquid-solid coating technique,bending strength of the Pb-Sn-Al composite electrode is improved.Compared with traditional Pb electrode,cell voltage of the composites decreases by 40 mV and polarization potential reduces by 4%. |
| |
| Keywords: | electrode material of PbA1 composite diffusion welding interface evolution electrochemical property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
