| 工艺因素对非水解溶胶-凝胶法低温合成硅酸锆的影响 |
| |
| 引用本文： | 周艳华.工艺因素对非水解溶胶-凝胶法低温合成硅酸锆的影响[J].江苏陶瓷,2012,45(1):7-9. |
| |
| 作者姓名： | 周艳华 |
| |
| 作者单位： | 江西蓝天学院土木系,江西,330098 |
| |
| 摘 要： | 以工业纯ZrCl4、Si（OC2H5）4为前驱体，采用无溶剂的非水解溶胶-凝胶法合成了硅酸锆，研究矿化剂种类、矿化剂用量、前驱物配比对硅酸锆合成效果的影响。结果表明：以LiF为矿化剂、前驱物n（Si）：n（Zr）=1．2：1、矿化剂用量n（Li）：n（Si）=0．3：1、煅烧温度为700℃，可制备出合成率高达98．4％的硅酸锆。
|
| 关 键 词： | 非水解溶胶-凝胶法 工艺因素 硅酸锆 |
Effects of Technological Factors on Low Temperature Nonhydrolytic Sol-Gel Synthesis of Zircon |
| |
| Zhou Yan-hua.Effects of Technological Factors on Low Temperature Nonhydrolytic Sol-Gel Synthesis of Zircon[J].Jiangsu Ceramics,2012,45(1):7-9. |
| |
| Authors: | Zhou Yan-hua |
| |
| Affiliation: | Zhou Yan-hua (Department of Civil Engineering, Jiangxi Bluesky Institute , Jiangxi Nanchang 330098) |
| |
| Abstract: | Zircon has been synthesized by the solvent-free non-hydrolytic sol-gel route using zirconium tetrachloride and tetraethoxysilane as precursors. Studies were made on the influences of kinds and contents of minerlizers and the molar ratios of the precursors. The results show that synthesis rate of zircon is up to 98.4% when the molar ratio of tetraethoxysilane to zirconium tetrachloride is 1.2:1, the molar ratio of lithium fluoride to tetraethoxysilane is 0.3:1, and the annealing temperature is 700℃ with lithium chloride as minerlizer. |
| |
| Keywords: | Non-hydrolytic Sol-Gel Technological Factors Zircon |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
