|
|||||
|
|
| 高锰TWIP钢的冷轧变形行为 | |
| 引用本文： | 苏钰,李麟,符仁钰,刘淑梅.高锰TWIP钢的冷轧变形行为[J].材料热处理学报,2012,33(1):84-88. |
| 作者姓名： | 苏钰 李麟 符仁钰 刘淑梅 |
| 作者单位： | 1. 上海大学材料学院,上海200072／上海工程技术大学材料学院,上海201620 2. 上海大学材料学院,上海,200072 3. 上海工程技术大学材料学院,上海,201620 |
| 基金项目： | 国家自然科学基金，上海市重点学科建设项目 |
| 摘 要： | 研究了低层错能奥氏体TWIP钢的冷轧组织和织构的演变。随着应变的增加,孪晶变形机制被激活。TEM、XRD等观察结果显示:随着应变量的增加,孪晶增加。在不同应变水平上,G{011}<100>织构都占主要位置。变形初始时,B{011}<211>织构强度较低,随着应变增加其强度显著增加。而E{111}<011>、Y{111}<112>、RG{011}<011>、Cu{112}<111>、CuT{552}<115>等织构在不同应变水平呈不同变化趋势。与其他织构相比,Cube{001}<100>织构强度相当低。 |
| 关 键 词： | 奥氏体 TWIP钢 冷轧 织构 孪晶 |
Cold rolling behaviour of a high Mn TWIP steel |
|
| SU Yu,LI Lin,FU Ren-yu,LIU Shu-mei.Cold rolling behaviour of a high Mn TWIP steel[J].Transactions of Materials and Heat Treatment,2012,33(1):84-88. | |
| Authors: | SU Yu LI Lin FU Ren-yu LIU Shu-mei |
| Affiliation: | 1.Department of Materials Science and Engineering,Shanghai University,Shanghai 200072,China;2.School of Materials Engineering,Shanghai University of Engineering Science,Shanghai 201620,China) |
| Abstract: | The microstructure and texture during cold rolling and annealing of a low stacking fault energy(SFE) austenitic TWIP steel was studied by means of transmission electron microscopy(TEM) and X-ray diffraction(XRD).The results show that with increasing strains,mechanical twinning mechanism becomes active.TEM observations show the presence of deformation twinning at low strains.As the strain increases the volume fraction of twins increases.The G{011}<100> orientation is dominant at every strain level.The B{011}<211> orientation intensity increases as strain increases,while additional texture components of E{111}<011>,Y{111}<112>,RG{011}<011>,Cu{112}<111> and CuT{552}<115> orientation develop at different strain levels.Compared to these orientations the Cube{001}<100> orientation intensity remains rather low. |
| Keywords: | austenite TWIP steel cold rolling texture twinning |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |