High flash point electrolyte for use in lithium-ion batteries |
| |
Authors: | P Isken C Dippel R Schmitz RW Schmitz M Kunze S Passerini M Winter A Lex-Balducci |
| |
Affiliation: | Institute of Physical Chemistry, Westfälische Wilhelms-University Münster, Corrensstraße 28/30, 48149 Münster, Germany |
| |
Abstract: | The high flash point solvent adiponitrile (ADN) was investigated as co-solvent with ethylene carbonate (EC) for use as lithium-ion battery electrolyte. The flash point of this solvent mixture was more than 110 °C higher than that of conventional electrolyte solutions involving volatile linear carbonate components, such as diethyl carbonate (DEC) or dimethyl carbonate (DMC). The electrolyte based on EC:ADN (1:1 wt) with lithium tetrafluoroborate (LiBF4) displayed a conductivity of 2.6 mS cm−1 and no aluminum corrosion. In addition, it showed higher anodic stability on a Pt electrode than the standard electrolyte 1 M lithium hexafluorophosphate (LiPF6) in EC:DEC (3:7 wt). Graphite/Li half cells using this electrolyte showed excellent rate capability up to 5C and good cycling stability (more than 98% capacity retention after 50 cycles at 1C). Additionally, the electrolyte was investigated in NCM/Li half cells. The cells were able to reach a capacity of 104 mAh g−1 at 5C and capacity retention of more than 97% after 50 cycles. These results show that an electrolyte with a considerably increased flash point with respect to common electrolyte systems comprising linear carbonates, could be realized without any negative effects on the electrochemical performance in Li-half cells. |
| |
Keywords: | Lithium-ion battery High flash point electrolyte Safety Adiponitrile |
本文献已被 ScienceDirect 等数据库收录! |