| 基于UG的图形化数控编程及二次开发技术的探讨 |
| |
| 引用本文： | 项辉宇,刘和山,张树生,孙胜.基于UG的图形化数控编程及二次开发技术的探讨[J].山东大学学报(工学版),2000,30(1):52-58. |
| |
| 作者姓名： | 项辉宇 刘和山 张树生 孙胜 |
| |
| 作者单位： | 1. 山东工业大学机械工程学院,济南,250061
2. 山东工业大学材料学院模具中心 |
| |
| 摘 要： | 介绍了采用Unigraphics软件系统实现复杂型面零件数控加工的图形化编程技术的一般方法和特点，探讨了采用该软件系统提供的二次开发语言GRIP编程实现数控加工代码读取并实现刀具轨迹仿真模拟的方法．
|
| 关 键 词： | 数控切削 计算机辅助设计 计算机辅助制造 |
| 修稿时间： | 1998-09-24 |
STUDY ON NC GRAPHICS PROGRAMMING METHOD AND FURTHER DEVELOPMENT METHOD BASED ON UNIGRAPHICS SOFTWARE |
| |
| Xiang Huiyu,Liu Heshan,Zhang Shusheng,Sun Sheng.STUDY ON NC GRAPHICS PROGRAMMING METHOD AND FURTHER DEVELOPMENT METHOD BASED ON UNIGRAPHICS SOFTWARE[J].Journal of Shandong University of Technology,2000,30(1):52-58. |
| |
| Authors: | Xiang Huiyu Liu Heshan Zhang Shusheng Sun Sheng |
| |
| Affiliation: | Xiang Huiyu
,Liu Heshan
;(Coll. of Mech. Eng., Shandong Univ. Of Tech., Jinan 250061);Zhang Shusheng
;(Coll.of Mech. Eng., Shandong Univ. Of Tech., Jinan 250061);Sun Sheng
;(Coll. of Mech. Eng., Shandong Univ. Of Tech., Jinan 250061) |
| |
| Abstract: | The general machining method of complex shaped parts and its characteristics of NC graphics programming method based on UG software are introduced. The verify method of NC codes produced by this method and the main procedure of developing verifying software with GRIP language are illustrated. Meanwhile the way to improve the quality and efficiency of NC manufacturing is recommended. |
| |
| Keywords: | Numerical control cutting Computer aided design Computer aided manufacturing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
