| 碳纤维/乙烯基酯树脂单向复合材料拉挤工艺研究 |
| |
| 引用本文： | 李鹏,杨小平,李建国.碳纤维/乙烯基酯树脂单向复合材料拉挤工艺研究[J].玻璃钢/复合材料,2003(1):24-26. |
| |
| 作者姓名： | 李鹏 杨小平 李建国 |
| |
| 作者单位： | 北京化工大学,100029 |
| |
| 基金项目： | 国家 8 63计划资助项目 (2 0 0 1AA335 0 30 ) |
| |
| 摘 要： | 本文系统研究了引发体系的组成及含量，三段模具温度，内脱模剂的含量和碳纤维体积含量对碳纤维/乙烯基酯树脂复合材料拉挤工艺和拉挤复合材料性能的影响。确定了以上各参数的最佳范围，连续生产出性能优异的碳纤维拉挤复合材料。
|
| 关 键 词： | 碳纤维／乙烯基酯树脂 单向复合材料 拉挤工艺 研究 |
INVESTIGATION ON THE PULTRUSION TECHNOLOGY OF CARBON/VINYLESTER COMPOSITE |
| |
| Li Peng,Yang Xiaoping,Li Jianguo.INVESTIGATION ON THE PULTRUSION TECHNOLOGY OF CARBON/VINYLESTER COMPOSITE[J].Fiber Reinforced Plastics/Composites,2003(1):24-26. |
| |
| Authors: | Li Peng Yang Xiaoping Li Jianguo |
| |
| Affiliation: | Beijing University of Chemical Technology |
| |
| Abstract: | In this paper the effects of the type and content of initiators on resin curing behaviors and the pultrusion process were studied by using DSC tests .The influences of the three-part temperatures,content of the inner mould release agent and volume content of fiber on the pultrusion process and pultruded composites were discussed through experiments.And the best value ranges of the above factors were determined. |
| |
| Keywords: | carbon fiber composite pultrusion vinylester resin |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
