Effects of CdCl2 in CdTe on the properties of sintered CdS/CdTe solar cells

Sintered CdS films on glass substrates with low electrical resistivity and high optical transmittance have been prepared by a coating and sintering method. All-polycrystalline CdS/CdTe solar cells with different microstructures and properties of the CdTe layer were fabricated by coating a number of CdTe slurries, which consisted of cadmium and tellurium powders, an appropriate amount of propylene glycol and various amounts of CdCl₂, on the sintered CdS films and by sintering the glass-CdS-(Cd + Te) composites at various temperatures. The presence of more than 5 wt% of CdCl₂ in the (Cd + Te) layer enhances the sintering of the CdTe film and the junction formation by a liquid-phase sintering mechanism. A low sintering temperature results in poor densification of the CdTe layer and the CdS-CdTe interface, whereas a high sintering temperature results in a deeply buried homojunction. The optimum temperature for the sintering of the CdTe layer and for junction formation decreases with increasing amount of CdCl₂. All-polycrystalline CdS/CdTe solar cells with an efficiency of 10.2% under solar irradiation have been fabricated by a coating and sintering method using cadmium and tellurium powders for the CdTe layer.