| PVC四通管注射模设计 |
| |
| 引用本文： | 赵跃文.PVC四通管注射模设计[J].模具工业,2002(6):30-32. |
| |
| 作者姓名： | 赵跃文 |
| |
| 作者单位： | 华北工学院,山西太原,030008 |
| |
| 摘 要： | 介绍了PVC四通管注射模设计 ,阐述了弯型芯的旋转抽芯过程以及模具顶出、回程及冷却系统设计。实践证明 ,该模具结构合理 ,生产的塑件可以满足设计要求
|
| 关 键 词： | PVC四通管 注射模 旋转抽芯 冷却系统 |
| 文章编号： | 1001-2168(2002)06-0030-03 |
| 修稿时间： | 2001年11月13 |
Design of the Injection Mould for PVC Four-Way Pipes |
| |
| ZHAO Yue-wen.Design of the Injection Mould for PVC Four-Way Pipes[J].Die & Mould Industry,2002(6):30-32. |
| |
| Authors: | ZHAO Yue-wen |
| |
| Abstract: | The design of the injection mould for PVC four-way pipes was introduced. The rotating core-pulling process of the bent core and the design of the ejection, returning and cooling systems of the mould were stated. Practices proved that the structure of the die is reasonable and the produced plastic parts can meet the requirement of the design. |
| |
| Keywords: | PVC four-way pipe injection mould rotational core-pulling cooling system |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
