| 基于实例的需求产品配置技术研究 |
| |
| 引用本文： | 王新,谭建荣,孙卫红. 基于实例的需求产品配置技术研究[J]. 中国机械工程, 2006, 17(2): 146-151 |
| |
| 作者姓名： | 王新 谭建荣 孙卫红 |
| |
| 作者单位： | 1. 浙江大学CAD&CG国家重点实验室,杭州,310027;河北理工大学,唐山,063000
2. 浙江大学CAD&CG国家重点实验室,杭州,310027 |
| |
| 基金项目： | 国家科技攻关项目;国家重点基础研究发展计划(973计划) |
| |
| 摘 要： | 通过对大批量定制生产模式下的需求产品配置技术的研究，提出了产品族需求类和需求匹配模板的概念，建立了相应的需求产品模型以及基于实例的需求产品配置模型，采用二级相似性匹配的方法，得到需求产品的配置结果，并分析了配置方法对需求响应的影响。配置方法在电梯的需求产品配置响应中得到了应用。
|
| 关 键 词： | 大批量定制 配置设计 需求产品 需求响应 基于实例推理 |
| 文章编号： | 1004-132X（2006）02-0146-06 |
| 收稿时间： | 2005-03-10 |
| 修稿时间： | 2005-03-10 |
Research on Technology of Case-based Configuration for Requirement Product |
| |
| Wang Xin,Tan Jianrong,Sun Weihong. Research on Technology of Case-based Configuration for Requirement Product[J]. China Mechanical Engineering, 2006, 17(2): 146-151 |
| |
| Authors: | Wang Xin Tan Jianrong Sun Weihong |
| |
| Abstract: | On the basis of researches on requirement product configuration in Mass Customization,the concepts of product family requirement class(PFRC) and requirement matching template were put forward,and a case-based requirement-product-configuration(CB-RPC) model and a corresponding requirement product model were presented.The result of CB-RPC was obtained by the method of two-level similar matching.In addition,the effect of the method on response for requirement was analyzed.Finally,the model and the method given are applied and verified in elevator industry. |
| |
| Keywords: | mass-customizations configuration designs requirement products requirement response CBR |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
