| 基于STC单片机的真空测量显示系统的设计 |
| |
| 引用本文： | 舒鑫,郭其一. 基于STC单片机的真空测量显示系统的设计[J]. 测控技术, 2008, 27(4): 94-96 |
| |
| 作者姓名： | 舒鑫 郭其一 |
| |
| 作者单位： | 同济大学,电气工程及自动化系,上海,200331 |
| |
| 基金项目： | 同济大学重点科研基全资助项目 |
| |
| 摘 要： | 介绍了工程应用上一个简单实用的真空测量显示系统的设计原理,给出了STC单片机与外围控制硬件之间的接口设计,根据工业使用要求对所采集的电压数据进行插值处理并建立数据表,通过相应的C语言查表程序揭示了系统的开发过程。
|
| 关 键 词： | 真空 STC单片机 数据表 |
| 文章编号： | 1000-8829(2008)04-0094-03 |
| 修稿时间： | 2007-05-16 |
System Design for Measuring and Displaying Vacuum Based on STC Microcontroller |
| |
| SHU Xin,GUO Qi-yi. System Design for Measuring and Displaying Vacuum Based on STC Microcontroller[J]. Measurement & Control Technology, 2008, 27(4): 94-96 |
| |
| Authors: | SHU Xin GUO Qi-yi |
| |
| Abstract: | The designing principles of an useful but simple system which is used in measuring and displaying vacuum are described.The interface design between STC MCU and peripheral controlled hardware is presented.The whole voltage data is first interpolated and after that a datasheet is founded.Finally the process of system's development with a C program case is provided. |
| |
| Keywords: | vacuum STC MCU datasheet |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
