| 现代设计方法在盘形凸轮快速设计中的应用 |
| |
| 引用本文： | 何世松,贾颖莲. 现代设计方法在盘形凸轮快速设计中的应用[J]. 机械工程师, 2009, 0(9): 37-39 |
| |
| 作者姓名： | 何世松 贾颖莲 |
| |
| 作者单位： | 1. 南昌大学,机电工程学院,南昌,330031;江西交通职业技术学院,机电工程系,南昌,330013
2. 江西交通职业技术学院,机电工程系,南昌,330013 |
| |
| 摘 要： | 盘形凸轮在内燃机的配气机构等场合中广泛使用，但传统设计方法设计凸轮存在效率低、精度不高等不足。文中介绍了利用计算机辅助设计手段进行凸轮设计的方法和技巧，指出了借助现代设计方法可以极大地提高凸轮的设计效率，从而缩短产品的开发周期。
|
| 关 键 词： | 现代设计方法 Pro/E 盘形凸轮 运动仿真 |
Quick Design of Disc Cam by Applying a Modern Design Method |
| |
| HE Shi-song,JIA Ying-lian. Quick Design of Disc Cam by Applying a Modern Design Method[J]. Mechanical Engineer, 2009, 0(9): 37-39 |
| |
| Authors: | HE Shi-song JIA Ying-lian |
| |
| Affiliation: | HE Shi-song, JIA Ying-lian (1.School of Mechanical ＆ Electrical Engineering, Nanchang University, Nanchang 330031, China; 2.Department of Mechanical ＆ Electrical Engineering, Jiangxi V＆T College of Communication, Nanchang 330013, China) |
| |
| Abstract: | Disc cam is used broadly in distributing-gas mechanism of internal-combustion engine. But there are some shortages like low-efficiency and low-accuracy of the traditional design method for cam. The paper introduced the method and technique for designing cam by using Computer Aided Design, and pointed out that using modern design method can raise the effieiencies of designing cam substantially, at the same time, reduce the life-cycle of researching and developing products. |
| |
| Keywords: | Pro/E |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
