| 重度亚硫酸化改性栲胶鞣质分析方法 |
| |
| 引用本文： | 陈武勇,陈发奋,王应红. 重度亚硫酸化改性栲胶鞣质分析方法[J]. 皮革科学与工程, 2003, 13(4): 12-15 |
| |
| 作者姓名： | 陈武勇 陈发奋 王应红 |
| |
| 作者单位： | 皮革化学与工程教育部重点实验室(四川大学),四川成都,610065 |
| |
| 基金项目： | 国家高新技术研究发展项目 ( 2 0 0 1AA64 70 2 0 ) |
| |
| 摘 要： | 应用鞣质测定的标准方法对重度亚硫酸化改性栲胶进行分析 ,其鞣质含量仅为 3 .2 %,而鞣质的定性试验却表明滤液中仍存在大量的鞣质。说明需对此方法进行改进以适合此类产品的分析。在鞣质测定方法的基础上作了适当改进 ,对测定时的pH值、振荡时间及称样量对鞣质含量测定的影响进行研究 ,结果表明 :称样量为 10 10 .5 g/ 10 0 0ml、测定 pH值为 4.0± 0 .1、振荡时间为 10min时 ,鞣质吸收完全 ,并且平行实验的相对误差小 ,重现性好。这一改进方法可以作为重度亚硫酸化改性栲胶的生产控制和产品质量分析
|
| 关 键 词： | 重度亚硫酸化 改性栲胶 鞣质 测定方法 生产控制 产品质量 制革 复鞣剂 |
| 文章编号： | 1004-7964(2003)04-0012-04 |
| 修稿时间： | 2003-04-28 |
Analysis Method of Intensive Modified Tannin Extracts |
| |
| CHEN Wu-yong,CHEN Fa-fen,WANG Yin-hong. Analysis Method of Intensive Modified Tannin Extracts[J]. Leather Science and Engineering, 2003, 13(4): 12-15 |
| |
| Authors: | CHEN Wu-yong CHEN Fa-fen WANG Yin-hong |
| |
| Abstract: | The standard method of determining tannin was used to analyze intensive sulfitation tannin extract and the results showed there was only 3.2% of tannin in the modified product. But the qualitative gelatin test of tannin indicated the filtrate contained a mass of tannin. So this method must be improved to be suitable for the modified product. A improved method based on mensuration of tannin has been studied on pH of solution, analysis concentration of the modified extract and shaking time. The results indicated that tannin in the modified extract could be absorbed completely under the condition of 10-10.5g/1000ml, pH=3.9-4.1 and shaking for ten munutes. The relative error of parallel experiment is limit. The improved method can be used to control the process of intensive sulfitation tannin and analyze the quality of product. |
| |
| Keywords: | tanning extracts tannin sulfitation analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
