| 形变参量和形变温度对微碳深冲钢板织构特征的影响 |
| |
| 引用本文： | 吕庆功,李成明,倪爱娟,赵金锋.形变参量和形变温度对微碳深冲钢板织构特征的影响[J].热加工工艺,2009,38(18). |
| |
| 作者姓名： | 吕庆功 李成明 倪爱娟 赵金锋 |
| |
| 作者单位： | 1. 北京科技大学中冶技术发展有限公司,北京,100029
2. 北京科技大学材料科学与工程学院,北京,100083 |
| |
| 摘 要： | 对生产试制的微碳深冲钢板的热轧、冷轧和退火试样的织构和金相组织进行了分析,描述了非{111}织构的工序演变过程,并与常规的{111}织构的演变过程进行了比较.研究表明,在非{111}织构的演变过程中,热轧终轧温度(FT)和冷轧压下率(CR)体现出对织构比较明显的影响规律.
|
| 关 键 词： | 深冲钢板 织构 金相组织 热轧 冷轧 退火 |
Evolvement of Non-{111}Textures along Processing Steps of Micro-carbon Deep Drawing Steel Sheet |
| |
| LV Qinggong,LI Chengming,NI Aijuan,ZHAO Jinfeng.Evolvement of Non-{111}Textures along Processing Steps of Micro-carbon Deep Drawing Steel Sheet[J].Hot Working Technology,2009,38(18). |
| |
| Authors: | LV Qinggong LI Chengming NI Aijuan ZHAO Jinfeng |
| |
| Abstract: | The texture and microstructure of samples after hot-rolling,cold-rolling and annealing were analyzed with regard to a trial-manufacture of micro-carbon deep drawing steel sheet.The evolvement of non-{111} textures was described along processing steps,which was compared with routine {111} texture.The results show that,during the evolvement of non-{111} textures,the FT(Finishing Temperature) and CR(Cold-rolling Rate) represent obvious influence on the textures. |
| |
| Keywords: | deep drawing steel sheet texture microstructure hot-rolling cold-rolling annealing |
| 本文献已被 万方数据 等数据库收录！ |
|
