Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System

The main parameters of electrospark alloying of steel 45 with anodes made from Ni – Cr – Al – Y alloys have been investigated. The anodes were fabricated by casting and hot pressing. The highest values of the mass transfer coefficient were observed in the case of electrospark alloying with hot-pressed alloys. Microstructure and x-ray phase analyses of electrospark coatings revealed the presence of solid solutions based on nickel, iron, chromium as well as intermetallic compounds. Coatings obtained by electrospark alloying with hot-pressed alloy are more wear-resistant than are coatings obtained by alloying with cast alloys.