首页 | 本学科首页   官方微博 | 高级检索  
     

硫化锌精矿的催化氧化酸浸工艺研究
引用本文:胡建东,许民,蒋俊洋.硫化锌精矿的催化氧化酸浸工艺研究[J].有色金属(冶炼部分),2003(5):21-23.
作者姓名:胡建东  许民  蒋俊洋
作者单位:南昌大学化材学院,江西南昌,330047
摘    要:用硫酸和氧气及催化剂对陕西某地的硫化锌精矿进行了浸出试验研究。详细考察了硫酸和催化剂的用量、浸出温度、浸出时间、液固质量比、搅拌速度等因素对浸出率的影响。试验结果表明:在适宜的工艺条件下,锌的浸出率可达到97%以上。硫以单质硫析出,回收率90%以上。

关 键 词:硫化锌精矿  硫酸  催化剂  浸出
文章编号:1007-7545(2003)05-0021-03

Study on the Leaching of Zinc Sulfide Concentrate by Catalyst and Oxidation
HU Jian-dong,XU Ming,JIANG Jun-yang.Study on the Leaching of Zinc Sulfide Concentrate by Catalyst and Oxidation[J].Nonferrous Metals(Extractive Metallurgy),2003(5):21-23.
Authors:HU Jian-dong  XU Ming  JIANG Jun-yang
Abstract:The test of leaching rate on zinc sulfide concentrate in Shaanxi province with sulfuric acid, oxygen and catalyst has been taken. The effecting factors such as consumption of sulfuric acid, catalyst, temperate, time, ratio of liquid to solid, and stir speed on leaching rate has been studied in detail. The results show that the zinc leaching rate may reach 97% on optimum conditions, the sulphur element can be recovered in the form of S, and the S recovery is more than 90%.
Keywords:Zinc sulfide concentrate  Sulfuric acid  Catalyst  Leaching  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号