| 基于AMESim的双轮铣槽机铣削装置液压系统仿真 |
| |
| 引用本文： | 赵伟民,张西伟,刘国莉,苏金哲. 基于AMESim的双轮铣槽机铣削装置液压系统仿真[J]. 机床与液压, 2016, 44(1): 152-154. DOI: 10.3969/j.issn.1001-3881.2016.01.037 |
| |
| 作者姓名： | 赵伟民 张西伟 刘国莉 苏金哲 |
| |
| 作者单位： | 1. 东北石油大学机械科学与工程学院,黑龙江大庆,163318;2. 徐州徐工基础工程机械有限公司,江苏徐州,221004;3. 渤海装备辽河热采机械公司,辽宁盘锦,124209 |
| |
| 基金项目： | "十二五"国家科技支撑计划重点项目(2011BAJ02B06) |
| |
| 摘 要： | 介绍了双轮铣槽机铣削装置的液压系统原理,并运用AMESim软件建立了整个铣轮液压系统仿真模型,并根据相关参数的设计要求,设置主阀口在8种不同开度,在高、低两种负载的外界输入条件下,分析铣轮马达流量、泵口压力随时间的变化,为双轮铣槽机液压系统设计提供了参考和依据。
|
| 关 键 词： | 双轮铣槽机 铣削装置 液压系统 AMESim |
Hydraulic System Simulation of Twin wheel Trench Cutter Milling Device Based on AMESim |
| |
| Abstract: | The hydraulic system principle of the twin wheel trench cutter milling device was introduced. The simulation model was built of an entire milling wheel device hydraulic system by using AMESim software. According to the design requirements of the relevant parameters, the eight different opening degrees of a main valve port were set. Under external input conditions of both high load and low load, the changes of motor flow and pump pressure were analyzed along with time. A reference and basis are provided for the design of twin wheel trench cutter hydraulic system. |
| |
| Keywords: | Twin-wheel trench cutter Milling device Hydraulic system AMESim |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
