| 基于UG二次开发技术的PDM/CAM集成方法研究 |
| |
| 引用本文： | 秦闯,刘战强.基于UG二次开发技术的PDM/CAM集成方法研究[J].机床与液压,2016,44(5):112-116. |
| |
| 作者姓名： | 秦闯 刘战强 |
| |
| 作者单位： | 山东大学机械工程学院,山东济南250061;山东大学高效洁净机械制造教育部重点实验室,山东济南250061 |
| |
| 基金项目： | 国家自然科学基金资助项目(51375272;U1201245)，高档数控机床与基础制造装备国家科技重大专项(2014ZX04012-014) |
| |
| 摘 要： | 基于企业应用集成原理,提出一种产品数据管理(Product Data Management,PDM)系统与CAM系统集成的方法。利用基于MFC的UG二次开发技术,将PDM系统嵌入UG软件,实现了PDM与CAM系统之间的软件操作功能交互与数据传递,在PDM集成框架下同时进行工艺数据管理与数控工艺编程。该方法提高了企业产品信息集成管理水平,加快了产品开发效率。
|
| 关 键 词： | PDM/CAM集成 企业应用集成 UG二次开发 功能交互 数据传递 |
Research of PDM/CAM Integration Method Based on Redevelopment of UG |
| |
| Abstract: | Based on the principle of enterprise application integration, an integration method of PDM and CAM systems was proposed. Using the technology of redevelopment of UG based on MFC, PDM system was embedded in UG software. Function interaction of software operation and data transfer were to be realized between PDM and CAM systems by the integrating. In the integrating framework of PDM, process data management and NC programming were carried on concurrently. The method improve product information management efficiency and product development efficiency for the enterprise. |
| |
| Keywords: | PDM/CAM integration Enterprise application integration Redevelopment of UG Function interaction Data transfer |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
