| 电液伺服试验平台液压系统研究 |
| |
| 引用本文： | 张兵,谢方伟,张新星,王存堂,韩俊伟. 电液伺服试验平台液压系统研究[J]. 机床与液压, 2016, 44(17): 79-83. DOI: 10.3969/j.issn.1001-3881.2016.17.018 |
| |
| 作者姓名： | 张兵 谢方伟 张新星 王存堂 韩俊伟 |
| |
| 作者单位： | 1. 江苏大学机械工程学院,江苏镇江,212013;2. 江苏大学工业中心,江苏镇江,212013;3. 哈尔滨工业大学机电工程学院,黑龙江哈尔滨,150001 |
| |
| 基金项目： | 江苏省博士后科学基金项目(1402093 C)；江苏大学高级人才科研启动基金项目(14JDG048) |
| |
| 摘 要： | 设计节约能源消耗和成本的液压动力机构是电液伺服系统在民用领域推广应用的关键技术之一。在讨论动力机构选型负载匹配原则的基础上,针对液压式汽车减震器测试平台具体实例对其动力机构进行了设计、计算和选型。根据减震器测试平台动力机构的参数对液压系统的油源流量和蓄能器容积进行了分析和计算。结果表明:该汽车减震器性能测试平台具有良好的稳态性能和接近于30 Hz的动态带宽等良好动态性能,证明了所提出的电液伺服系统液压方案是可行的。
|
| 关 键 词： | 电液伺服系统 动力机构 负载匹配 油源蓄能器 减震器测试平台 |
Research on Hydraulic System of Electro hydraulic Servo Testing Table |
| |
| Abstract: | To design the low cost and energy conserving hydraulic power mechanism is one of the key point to expand the applica -tion of electro-hydraulic servo system in civilian areas .The power mechanism of shock absorber testing table was designed and calculat -ed based on the discussion of the load matching rules , the servo-valve and hydraulic cylinder were determined .Meanwhile, the flow of the hydraulic power units and the working volume of the accumulator were analyzed and derived according to the parameters of shock absorber .The results show that the shock absorber testing table possess proper steady-state behavior and dynamic performance with 30 Hz frequency bandwidth , and then the rationality of mentioned electro-hydraulic servo system project concept demonstration process is verified. |
| |
| Keywords: | Electro-hydraulic servo system Power mechanism Load matching rules Hydraulic power units and accumulator Shock absorber testing table |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
