|
|||||
|
|
| CT20钛合金管材的冷轧工艺及组织性能的研究 | |
| 引用本文： | 刘伟,卢天健,杨冠军,王飞,卢亚峰,毛小南,杜宇,奚正平.CT20钛合金管材的冷轧工艺及组织性能的研究[J].钛工业进展,2009,26(6):15-18. |
| 作者姓名： | 刘伟 卢天健 杨冠军 王飞 卢亚峰 毛小南 杜宇 奚正平 |
| 作者单位： | 1. 西北有色金属研究院,陕西,西安,710016;西安交通大学,强度与振动教育部重点实验室,陕西,西安,710049 2. 西安交通大学,强度与振动教育部重点实验室,陕西,西安,710049 3. 西北有色金属研究院,陕西,西安,710016 |
| 基金项目： | 国家科技支撑计划，国家"973"项目 |
| 摘 要： | 研究了CT20低温钛合金管材的加工工艺及冷轧变形量、退火温度对管材力学性能的影响。结果表明：CT20合金对加工硬化不敏感，冷轧最大变形量应控制在45％以内；CT20合金管材通过不同温度热处理所获得的等轴、双态和片状组织的室温力学性能差别不大；20K低温下由于孪生变形的发生，片状组织的塑性最好，双态组织则介于片状和等轴组织之间；管材为等轴和双态组织时，冷成型性能优异；对管材进行αt＋β两相区910℃×1h，FC的热处理，可获得综合性能优良的双态组织。 |
| 关 键 词： | CT20 管材 加工工艺 力学性能 |
Correlation between Processing and Mechanical Properties of CT20 Cryogenic Titanium Alloy Tubes |
|
| Authors: | Liu Wei Lu Tianjian Yang Guanjun Wang Fei Lu Yafeng Mao Xiaonan Du Yu Xi Zhengping |
| Affiliation: | Liu Wei , Lu Tianjina , Yang Guanjun , Wang Fei , Lu Yafeng , Mao Xiaonan , Du Yu , Xi Zhengping ( 1. Northwest Institute for Nonferrous Metal Research, Xi＇an 710016, China;2. MOE Key Laboratory for Strength and Vibration, School of Aerospace, Xi＇an Jiaotong University, Xi＇an 710049, China) |
| Abstract: | The influence of cold deformation and temperature upon the processing and mechanical properties of CT20 cryogenic titanium alloy tubes is studied experimentally. Obtained results show that the plasticity of the tube is not sensitive to deformation hardening, and the maximum degree of cold deformation should be controlled under the level of 45%. Three different heat treatments are used, resulting in three different microstructures of the alloy： equiaxed, bimodal and lamellar. The alloy with lameUar structure has the best plasticity because of twinning, whilst the one with bimodal structure has the best overall mechanical properties and cold processing ability at cryogenic temperature. |
| Keywords: | CT20 |
| 本文献已被 维普 万方数据 等数据库收录！ | |