| 管接头挤压铸造成型工艺及模具设计 |
| |
| 引用本文： | 吕野楠. 管接头挤压铸造成型工艺及模具设计[J]. 铸造技术, 2012, 33(4): 469-470 |
| |
| 作者姓名： | 吕野楠 |
| |
| 作者单位： | 辽宁省交通高等专科学校机电系,辽宁 沈阳,110122 |
| |
| 摘 要： | 经过对管接头零件结构进行分析,确定采用挤压铸造工艺成形管接头.设计了两套挤压铸造模具,分析了模具结构特点及工作过程,最终确定弯销侧向分型间接挤压铸造模具方案.其模具结构简单、侧分型距离短,便于实现自动化生产.生产实践表明,管接头弯销侧向分型间接挤压铸造模具能够满足企业生产要求.
|
| 关 键 词： | 挤压铸造 模具设计 侧分型 |
Squeeze Casting Process for Connecting-piece and Its Mould Design |
| |
| LV Ye-nan. Squeeze Casting Process for Connecting-piece and Its Mould Design[J]. Foundry Technology, 2012, 33(4): 469-470 |
| |
| Authors: | LV Ye-nan |
| |
| Affiliation: | LV Ye-nan(Mechatronic Department,Liaoning Provincial College of Communication,Shenyan 110122,China) |
| |
| Abstract: | Considering the construction of connecting-piece,the squeeze-casting process was used to shape connecting piece and two sets of squeeze casting mold were designed for it.After analyzing the characteristics of them,the scheme of indirect squeeze-casting mould was selected for its simple construction and short-distance side-joint.This construction was proved to be right after practicing. |
| |
| Keywords: | squeeze casting mould design side joint |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
