| 基于宏程序的内孔余弦曲线槽的加工 |
| |
| 引用本文： | 杜立波,甘志军,郑书华.基于宏程序的内孔余弦曲线槽的加工[J].制造技术与机床,2012(5):96-98. |
| |
| 作者姓名： | 杜立波 甘志军 郑书华 |
| |
| 作者单位： | 1. 宁波技师学院机械技术系,浙江宁波,315032
2. 宁波工程学院机械工程学院,浙江宁波,315016 |
| |
| 基金项目： | 浙江省杰出青年基金项目(R1110646);浙江省新世纪高等教育教学改革项目(NO.yb09078) |
| |
| 摘 要： | 以滑座零件内孔中三维余弦曲线槽加工为例,介绍了加工中应用的机床、附件、工装和宏程序.通过采用附加第四轴和角度头,拓展了三轴加工中心的加工范围.
|
| 关 键 词： | 角度头 宏程序 余弦曲线 |
Machining the inner-hole cosine curve slots based on macro program |
| |
| DU Libo
,
GAN Zhijun
,
ZHENG Shuhua.Machining the inner-hole cosine curve slots based on macro program[J].Manufacturing Technology & Machine Tool,2012(5):96-98. |
| |
| Authors: | DU Libo GAN Zhijun ZHENG Shuhua |
| |
| Affiliation: | ② (①Mechanical Technology Department, Ningbo Technical College, Ningbo 315032, CHN; ②School of Mechanical Engineering, Ningbo University of Technology, Ningbo 315016,CHN) |
| |
| Abstract: | As an example of the machining of inner-hole three-dimensional cosine curve of the slide part, the article discusses the problem of the application of machine tools, accessories, tooling and macro programs, through adding the fourth axis and angle-head ,we develop the machining range of three-axis machining centers. |
| |
| Keywords: | Angle-head Macro Program Cosine Curve |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
