| 圆钢切分轧制的孔型设计 |
| |
| 引用本文： | 贾丽娜,王海儒,张辉. 圆钢切分轧制的孔型设计[J]. 钢铁研究学报, 2006, 18(4): 29-31 |
| |
| 作者姓名： | 贾丽娜 王海儒 张辉 |
| |
| 作者单位： | 1. 河北交通职业技术学院汽车工程系,河北,石家庄,050091
2. 燕山大学机械工程学院,河北,秦皇岛,066004 |
| |
| 摘 要： | 基于金属塑性变形基本理论,以圆钢双线切分为基本实体模型,结合生产实践,对切分位置、切分方式的选择和切分孔型系统的设计参数进行了分析,并建立了预切分轧件和切分轧件的面积计算模型.
|
| 关 键 词： | 切分轧制 孔型设计 预切分孔型 |
| 文章编号： | 1001-0963（2006）04-0029-03 |
| 修稿时间： | 2005-06-02 |
Pass Design of Round Steel Slit Rolling |
| |
| JIA Li-na,WANG Hai-ru,ZHANG Hui. Pass Design of Round Steel Slit Rolling[J]. Journal of Iron and Steel Research, 2006, 18(4): 29-31 |
| |
| Authors: | JIA Li-na WANG Hai-ru ZHANG Hui |
| |
| Abstract: | On the basis of the basic theory of metal distortion, Using round steel slit rolling as entity model and combining with production practice, the selection of slit location, slit mode and the design parameter of slit pass system were analyzed, and the area calculation model of pre-slit rolled piece and slit rolled piece was built. |
| |
| Keywords: | slit rolling pass design pre-slit pass |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
