Removal of mercaptans from a gas stream using continuous adsorption-regeneration

The removal of the mercaptan, 1-methyl-1-propanethiol, from aqueous solutions using a non-porous, electrically conducting carbon-based adsorbent (Nyex 1000) was investigated. The adsorption process was found to be rapid (equilibrium capacity achieved within 5 minutes) with low adsorptive capacity (of the order of 0.4 mg g(-1)) when compared with activated carbon. Electrochemical regeneration of the Nyex 1000 in a simple divided electrochemical cell within a sequential batch treatment unit restored 100% of the adsorbent's adsorptive capacity using treatment times as low as 20 minutes by passing a current of 0.5 A. The sorptive characteristics of a Nyex-water slurry were also modelled and investigated both in a bubble column and in a continuous adsorption-regeneration treatment system. It was demonstrated that the continuous removal-destruction system could achieve a step reduction in challenge gas concentration of approximately 75% for a period of 35 minutes with a current of 5 Amps. This was attributed to mass transfer enhanced by a combination of adsorption and chemical reaction with free chlorine species generated in the electrochemical process.