| 连续重整缠绕管式换热器的研制及工业应用 |
| |
| 引用本文： | 陈崇刚.连续重整缠绕管式换热器的研制及工业应用[J].压力容器,2011,28(5):41-47. |
| |
| 作者姓名： | 陈崇刚 |
| |
| 作者单位： | 中国石化洛阳石油化工工程公司,河南洛阳,471003 |
| |
| 摘 要： | 过去连续重整装置的混合进料换热器都是采用全焊接板壳式或直管立式换热器，由于结构原因，一直存在传热效率低或易损坏的问题，使得装置操作费用高、影响长周期运行。介绍了一种兼具板壳式换热器和管壳式换热器优点的，在连续重整装置中首次采用的缠绕管式换热器，作为新型的混合进料换热器的设计、研制和应用情况。该设备具有优良的传热工艺性能，又具有耐高温高压、抗操作波动的特点，是连续重整装置中较为理想的高效、高可靠性的设备。
|
| 关 键 词： | 连续重整 缠绕管 换热器 研制 应用 |
Research and Industrial Application of CCR Spiral Wound Exchanger |
| |
| CHEN Chong-gang.Research and Industrial Application of CCR Spiral Wound Exchanger[J].Pressure Vessel Technology,2011,28(5):41-47. |
| |
| Authors: | CHEN Chong-gang |
| |
| Affiliation: | CHEN Chong-gang (Luoyang Petrochemical Engineering Corporation,Sinopec,Luoyang 471003,China) |
| |
| Abstract: | It was used in CCR appliance as the feed mixture heat exchanger the fully welded plate-and-shell exchanger or straight vertical exchanger in the past,which caused either low heat transfer efficiency or damages for structural problems,correspondingly bringing about high cost and negative influence on long time operation.Spiral wound exchanger is introduced in the paper including its design,manufacturing research and industrial application with both advantages of the two former types,which is firstly utilized... |
| |
| Keywords: | CCR spiral wound heat exchanger research application |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
