首页 | 本学科首页   官方微博 | 高级检索  
     

底吹氩钢包内夹杂物粒子上浮行为的水模实验研究
引用本文:艾新港,李珺,沈明钢,王志英,刘楚威,姚玉强,张少勇.底吹氩钢包内夹杂物粒子上浮行为的水模实验研究[J].冶金能源,2012,31(4):13-16.
作者姓名:艾新港  李珺  沈明钢  王志英  刘楚威  姚玉强  张少勇
作者单位:辽宁科技大学材料与冶金学院
基金项目:2011年度高等学校博士学科点专项科研基金
摘    要:将修正伽利略准数作为对钢包内夹杂物上浮规律模拟的判据,以某厂150t底吹氩钢包为原型,建立了模型与原型尺寸比为1:4的物理模型。通过实验研究了吹气量、吹气孔与钢包中心距离、两吹气孔与钢包底中心连线的角度,对夹杂物粒子上浮去除的影响规律。实验结果表明:合理的吹气量为300 L/min;吹气孔靠近钢包中心、吹气孔与钢包中心连线角度小时,夹杂物上浮去除时间短,有利于夹杂物去除。

关 键 词:钢包  底吹氩  夹杂物  水模实验

Water model study on mechanism of inclusion removal in bottom argon blowing steel ladle
Ai Xingang , Li Jun , Shen Minggang , Wang Zhiying , Liu Chuwei , Yao Yuqiang , Zhang Shaoyong.Water model study on mechanism of inclusion removal in bottom argon blowing steel ladle[J].Energy For Metallurgical Industry,2012,31(4):13-16.
Authors:Ai Xingang  Li Jun  Shen Minggang  Wang Zhiying  Liu Chuwei  Yao Yuqiang  Zhang Shaoyong
Affiliation:Ai Xingang Li Jun Shen Minggang Wang Zhiying Liu Chuwei Yao Yuqian Zhang Shaoyong (University of Science and Technology Liaoning)
Abstract:Bssed on revised Galileo dimensionless number, a water model of 1/4 linear scale for 150t bottom blowing steel ladle was established. The influence of inclusion removing time of molten steel by blowing rate, the distance of blowing hole to ladle center and the angle of line through blowing hole and ladle center were studied. The experiment indic.am that the appropriate bottom blowing rate is 300L/ rain. The inclusion removing time is shorter and it is benefit for inclusion removing when blow near the ladle center or the sngle being small
Keywords:ladle bottom blowing inelusions water model experiment
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号