| 位置度公差在限制孔组轴线中的研究 |
| |
| 引用本文： | 刘桂珍.位置度公差在限制孔组轴线中的研究[J].防爆电机,2001(1):41-43. |
| |
| 作者姓名： | 刘桂珍 |
| |
| 作者单位： | 佳木斯大学机械工程学院,黑龙江佳木斯,154007 |
| |
| 摘 要： | 研究了位置度公差和尺寸公差在限制孔组轴线中因采用不同图样标注形式而导致公差累加效果的不同，量化了位置度公差与尺寸公差在控制孔组轴线中公差带的大小。本文通过对比性分析，充分肯定了位置度公差在限制孔组轴线中的应用。
|
| 关 键 词： | 孔组轴线 尺寸公差 位置度公差 公差带 孔加工 |
| 修稿时间： | 2001年1月18日 |
Study on Tolerance of Degree of position of Axis for Limiting Holes Group |
| |
| Liu Guizhen.Study on Tolerance of Degree of position of Axis for Limiting Holes Group[J].Explosion-proof Electric Machine,2001(1):41-43. |
| |
| Authors: | Liu Guizhen |
| |
| Affiliation: | Liu Guizhen |
| |
| Abstract: | This paper studies that tolerances accumulation effect is differet for sign formal of different dimension applying to tolerance on degree of position and dimension for axis of limiting holes group,and quantizes tolerance ranges of tolerance on degree of position and dimension for axis of controlling hole group.By analyzing the contrast,this paper sufficiently determines tolerance of degree of position in the application of limiting holes group. |
| |
| Keywords: | axis of holes group dimension tolerance tolerance of degree of position tolerance range |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
