Sulphide-induced deactivation of Pd/Al2O3 as hydrodechlorination catalyst and its oxidative regeneration with permanganate

Pd-based catalysts have become important in environmental catalysis for their ability to hydrodechlorinate a wide range of chlorinated organic contaminants in water under ambient conditions. The success of their application in the remediation practice, e.g. for groundwater treatment, is often hindered by the sensitivity of Pd to poisoning by sulphur compounds. In this study, the stability and sulphide-induced deactivation behaviour of a highly active Pd/Al₂O₃ catalyst was investigated. The specific activity of Pd for the hydrodechlorination of chlorobenzene corresponds to rate coefficients up to k_Pd = 350 L g⁻¹ min⁻¹. The totally deactivated catalyst, resultant of sulphide poisoning, was regenerated with potassium permanganate. The pH value, as a key parameter which may influence the degree of deactivation as well as the efficiency of catalyst regeneration, was evaluated. Results show that in clean water the Pd/Al₂O₃ catalyst showed no inherent deactivation regardless of the ageing time and the pH value of the catalyst suspension. The degree of catalyst poisoning effected by 1.8–5.4 μM sulphide, corresponding to molar ratios of S:Pd_surface = 1.5–8.5, was observed to be higher under neutral and alkaline than under acidic conditions. The exposure of the catalyst to higher sulphide concentration of 14.2 μM resulted in complete catalyst deactivation regardless of the pH conditions. However, the efficacy of permanganate as oxidative regenerant for the fouled catalyst showed strong pH-dependence. A regeneration time of 10–30 min at low pH was sufficient to recover completely the high catalytic activity of Pd/Al₂O₃ for the hydrodechlorination reaction.