| 芦竹磺化化机浆工艺条件的探讨 |
| |
| 引用本文： | 王玉珑,赵传山,刘艳新,秦培云,杨飞,尤鹏.芦竹磺化化机浆工艺条件的探讨[J].黑龙江造纸,2002,30(3):4-5,8. |
| |
| 作者姓名： | 王玉珑 赵传山 刘艳新 秦培云 杨飞 尤鹏 |
| |
| 作者单位： | 山东轻工业学院,济南250100 |
| |
| 摘 要： | 对芦竹SCMP工艺条件进行了研究 ,实验结果表明 :不同预处理条件及盘磨间隙对芦竹SCMP浆性能影响很大。在弱碱条件下 (1%NaOH用量 ) ,Na2 SO3用量 15 % ,最高温度 15 0℃ ,升温保温 1h左右的预处理条件是适宜的 ;高浓磨浆时 ,建议采用 0 .3、0 .1、0 .1mm的盘磨间隙进行三段磨解 ,磨浆浓度 15 %
|
| 关 键 词： | SCMP 预处理 盘磨间隙 |
A Preliminary Study on SCMP from Bamboo |
| |
| Abstract: | The technologies of bamboo SCMP were studied in this article. The results show that different conditions of pretreatment and gap of refining mill have an important effect on properties of SCMP.The optimum conditions of pretreatment are 1% NaOH,15% Na 2SO 3, the max temperature 150℃,heating and for a hour. In refining stage, we advise adopting 0.3,0.1,0.1mm gaps of refining mill,refining density 15%. |
| |
| Keywords: | SCMP pretreatment gap of refining mill |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
