Condensation heat transfer on tubes in actual flue gas (Parametric study for condensation behavior)

In order to improve boiler efficiency, latent heat recovery from the flue gas is a very important concept. Condensation heat transfer on horizontal tubes was investigated experimentally by using flue gas from a natural gas boiler. The parametric studies concerning the effects of tube stages, gas velocities, SO₂ in the flue gas, and Teflon‐lined tubes were conducted at a wide range of tube surface temperature. The heat transfer was enhanced at the second stage due to the wake turbulence of the first stage. No significant decrease of the condensation in the second stage due to the condensate falling from the first stage could be observed. Even at the high gas velocity condition, the condensation pattern was similar to that observed in previous low gas velocity experiments. The effect of SO₂ in the flue gas on the condensation behavior could not be observed. The heat and mass transfer behaviors on stainless‐steel and Teflon‐lined surfaces were well predicted with the analogy correlation. The above results suggested that the heat and mass transfer were dominated by the convection and diffusion process on the gas side. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(2): 153–166, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10079