| Abstract: | An enhancement technique was developed for natural convection heat transfer from a tall, vertical heated plate to water. Rectangular grid fins attached to the base plate were utilized as a heat transfer promoter. These grid fins redirect the high‐temperature fluid ascending along the base plate toward the outside of the boundary layer and introduce the low‐temperature ambient fluid toward the base plate instead. The heat transfer coefficients of thus‐treated surfaces were measured and compared with a nontreated surface and a surface with conventional vertical plate‐fins. The highest performance was achieved for the experimental surfaces. In particular, the experimental surfaces with 5‐mm‐high, nonconducting grids and with 10‐mm‐high, conducting grid fins show 27% and 80% higher heat transfer coefficients compared to the turbulent heat transfer coefficients of the nontreated surface, respectively. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(2): 178–190, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10083 |
