| 4不锈钢-碳钢复合板多道次小变形轧制温度场的数值模拟 |
| |
| 引用本文： | 庞玉华 吴成 严平. 4不锈钢-碳钢复合板多道次小变形轧制温度场的数值模拟[J]. 特殊钢, 2006, 27(2): 9-12 |
| |
| 作者姓名： | 庞玉华 吴成 严平 |
| |
| 作者单位： | [1]西安建筑科技大学冶金学院,西安710055 [2]宝鸡有色金属加工厂（集团）,宝鸡721014 |
| |
| 基金项目： | 本课题为西安市工业攻关项目（ZZ05059） |
| |
| 摘 要： | 基于弹塑性热力耦合有限元法研究了72mm Q235钢基板和14mm 304不锈钢复板11道次变形至12mm复合板的热轧过程,并应用有限元MARC软件二次开发技术建立了温度场模型。模拟结果表明,变形区内,复合板表面温度持续下降,界面温度略有升高;变形区外,表面温度有所回升;随轧制过程进行,轧件高度方向温度梯度逐渐减小;界面处温度呈“S”形,变形区温度变化显著,且随轧制速度提高,升温明显。
|
| 关 键 词： | 不锈钢-碳钢复合板 热轧 温度分布 热力耦合 有限元模拟 |
| 收稿时间： | 2005-10-19 |
| 修稿时间： | 2005-10-19 |
Numerical Simulation of Temperature Field of Stainless Steel-Carbon Steel Clad Sheet during Multipass-Small Reduction Hot Rolling |
| |
| Pang Yuhua, Wu Cheng,Yah Ping, Baoji ). Numerical Simulation of Temperature Field of Stainless Steel-Carbon Steel Clad Sheet during Multipass-Small Reduction Hot Rolling[J]. Special Steel, 2006, 27(2): 9-12 |
| |
| Authors: | Pang Yuhua Wu Cheng Yah Ping Baoji ) |
| |
| Affiliation: | Pang Yuhua, Wu Cheng,Yah Ping, Baoji 721014) |
| |
| Abstract: | Based on elastic-plastic and thermal-mechanical couple finite element method(FEM),the hot rolling process for 72 mm Q235 steel base plate and 14 mm 304 stainless steel clad plate deforming with 11 pass and small reduction to 12 mm clad steel plate was studied and the model of temperature field has been established by developed finite element MARC software.The results showed that in deformed zone,the surface temperature of clad plate continuously dropped and the temperature at interface of clad plate slightly went up;outside deformed zone,the surface temperature somewhat went up;with next passes rolling,the temperature gradient in the direction of height of block gradually decreased;and the temperature at interface of clad plate showed "S" shape,the change of temperature was obvious and with rolling speed increasing the temperature went up obviously. |
| |
| Keywords: | Stainless Steel-Carbon Steel Clad Sheet Hot Roiling Temperature Distribution Thermal-Mechanical Couple FEM |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
