| 复合相变储能材料制备工艺对其浸渗率和相对密度的影响 |
| |
| 引用本文： | 黄金,张仁元,伍彬. 复合相变储能材料制备工艺对其浸渗率和相对密度的影响[J]. 材料科学与工程学报, 2006, 24(5): 653-657 |
| |
| 作者姓名： | 黄金 张仁元 伍彬 |
| |
| 作者单位： | 广东工业大学材料与能源学院,广东,广州,510090;广州生产力促进中心,广东,广州,510091 |
| |
| 基金项目： | 国家自然科学基金 , 广东工业大学校科研和教改项目 |
| |
| 摘 要： | 本文探索了Na2SO4/SiO2无机盐/陶瓷基复合相变储能材料的自发熔融浸渗工艺制度.讨论了预制体制备工艺的四个主要影响因素:造孔剂含量、成型压力、烧成温度和颗粒粒度与复合相变储能材料的浸渗率和相对密度的关系,分析了熔融盐与预制体浸渗合成时,浸渗温度、浸渗时间以及浸渗方式对复合相变储能材料浸渗率和相对密度的影响.对复合相变储能材料的物相组成和显微结构进行分析,结果表明:制备工艺对复合储能材料的物相组成影响不大,Na2SO4与SiO2两相表现出较好的高温稳定性和相容性,且分布均匀.
|
| 关 键 词： | 自发熔融浸渗 无机盐/陶瓷基 相变储能 复合储能材料 |
| 文章编号： | 1673-2812(2006)05-0653-05 |
| 修稿时间： | 2005-11-05 |
Effect of Fabrication Technology on Infiltration Percentage and Relative Density of Composite Phase-change Energy Storage Materials |
| |
| HUANG Jin,ZHANG Ren-yuan,WU Bin. Effect of Fabrication Technology on Infiltration Percentage and Relative Density of Composite Phase-change Energy Storage Materials[J]. Journal of Materials Science and Engineering, 2006, 24(5): 653-657 |
| |
| Authors: | HUANG Jin ZHANG Ren-yuan WU Bin |
| |
| Abstract: | The salt/ceramic(Na_2SO_4/SiO_2) composite phase-change energy storage materials were fabricated successfully by molten Na_2SO_4 infiltrating porous ceramics preforms spontaneously.The relationships between pore-forming materials percentage,molding pressure,sintered temperature,particle size and infiltration percentage and relative density were discussed and the influence of infiltration temperature,infiltration time and infiltration mode on infiltration percentage and relative density were analyzed too.The phase composition and microstructure of samples were researched,and the results show that no additional phase appears other than Na_2SO_4 and SiO_2,chemical reactions between Na_2SO_4 and SiO_2 do not occur,and two phases are distributed equably. |
| |
| Keywords: | molten spontaneous infiltration salt/ceramic phase-change energy storage composite energy storage materials |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
