Optical properties of dense and porous spheroids consisting of primary silica nanoparticles

The light scattering by granular and macroporous silica spheroids consisting of nanometer-sized primary particles was systematically investigated using a laser particle counter coupled with a pulse height analyzer. The shape- and porosity-controlled spheroids as model particles were prepared using spray drying method by changing the particle size of colloidal suspension. The effect of shape and porosity of dense and porous spheroidal particles on electrical mobility was also studied using a differential mobility analyzer and an electron microscope. The electrical mobility equivalent diameter of particles classified by the differential mobility analyzer was estimated by measuring Feret diameter and the projected area equivalent diameter from the SEM micrographs. The electrical mobility diameter of the spheroids was in good agreement with the projected area equivalent diameter regardless of the primary particle size and porosity. The measured partial scattering cross section of dense and porous silica particles with same mobility diameter showed significant differences. As the primary particle size of granules and the porosity of porous particles increased at parity of electrical mobility diameter, the scattering intensity decreased. The effective refractive indices of dense and porous particles were computed by best fitting of the scattering intensity measurements. The porosities of dense and porous spheroids were calculated using the effective refractive indices as obtained by the effective medium theory. The porosities were also measured by a comparison of particle size before and after annealing at 1700°C. By comparing these porosities, the effective refractive indices of the spheroidal particles were confirmed.