首页 | 本学科首页   官方微博 | 高级检索  
     

变压器端部绝缘结构参数化设计及电场分析
引用本文:张沛红,单涛,时亚娟,齐玉麟,杜学承. 变压器端部绝缘结构参数化设计及电场分析[J]. 哈尔滨理工大学学报, 2012, 17(2): 76-79
作者姓名:张沛红  单涛  时亚娟  齐玉麟  杜学承
作者单位:1. 哈尔滨理工大学电气与电子工程学院,黑龙江哈尔滨,150080
2. 哈尔滨变压器有限责任公司研发中心,黑龙江哈尔滨,150070
摘    要:变压器端部结构复杂,电场极不均匀,且铁轭幅向不对称,是绝缘的薄弱环节.针对此类问题建立了变压器端部绝缘件的参数化建模系统,并对一台220kV变压器端部电场进行了三维数值分析.利用此参数化建模系统可以方便地进行端部绝缘结构设计,当电场分布不合理时可以调整端部绝缘件结构尺寸重新进行电场分析,直到满足设计要求.

关 键 词:变压器  绝缘结构  参数化设计  三维电场分析

Parametric Design of Insulation Structure and Analysis of the Electric Field at Winding End of Transformer
ZHANG Pei-hong , SHAN Tao , SHI Ya-juan , QI Yu-lin , DU Xue-cheng. Parametric Design of Insulation Structure and Analysis of the Electric Field at Winding End of Transformer[J]. Journal of Harbin University of Science and Technology, 2012, 17(2): 76-79
Authors:ZHANG Pei-hong    SHAN Tao    SHI Ya-juan    QI Yu-lin    DU Xue-cheng
Affiliation:1.Sshool of Electrical & Electronic Engineering,Harbin University of Science and Technology,Harbin,150080,China; 2.Research and Development Center,Harbin transformer Co.,Ltd,Harbin,150070,China)
Abstract:Due to the complicated structure,the very non-uniform electric field distribution,and the asymmetric yoke,the insulation at the end of winding in transformer is the critical section.This paper developed a parametric modeling system of insulation structure,and analyzed the three-dimensional electric field at the winding end of a 220kV transformer.Using this parametric modeling system,insulation structure can be conveniently adjusted until the demand of insulation margin is satisfied.
Keywords:transformer  insulation structure  parametric design  3D electric field analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号