| 龙芯2号原型系统北桥的设计与实现 |
| |
| 引用本文： | 蔡飞,沈海华,高翔. 龙芯2号原型系统北桥的设计与实现[J]. 高技术通讯, 2010, 20(1). DOI: 10.3772/j.issn.1002-0470.2010.01.011 |
| |
| 作者姓名： | 蔡飞 沈海华 高翔 |
| |
| 作者单位： | 1. 中国科学院计算技术研究所微处理器技术研究中心,北京,100190;中国科学院研究生院,北京,100049
2. 中国科学院计算技术研究所微处理器技术研究中心,北京,100190 |
| |
| 基金项目： | 973计划，国家自然科学基金，863计划，北京市自然科学基金 |
| |
| 摘 要： | 针对龙芯2号原型系统中主要I/O数据通路上数据流的特点,设计并实现了一款适用于龙芯2号原型系统的北桥。在此北桥的设计中提出并实现了一种用于外部设备互连(PCI)主桥(PCI host bridge,PHB)的数据传输优化方法,这种方法通过自适应的写合并、PCI写数据及时收集重打包和采用固定开销的分阶段PCI读数据预取策略,提高了PCI主桥中数据传输的效率。实验结果表明,所设计的北桥可以充分的利用PCI总线带宽,并且在处理PCI总线上的直接内存访问(DMA)读数据流和处理器更新显卡显存的PCI写数据流时相对同类系统而言具有明显的性能优势。
|
| 关 键 词： | 北桥 龙芯 芯片组 外部设备互连(PCI) PCI主桥(PHB) |
The design and implementation of north-bridge used in Godson-2 prototype system |
| |
| Cai Fei,Shen Haihua,Gao Xiang. The design and implementation of north-bridge used in Godson-2 prototype system[J]. High Technology Letters, 2010, 20(1). DOI: 10.3772/j.issn.1002-0470.2010.01.011 |
| |
| Authors: | Cai Fei Shen Haihua Gao Xiang |
| |
| Abstract: | In order to meet the I/O requirement of the Godson-2 prototype system, a north-bridge was designed and implemented according to the characteristics of the main I/O data flow in the system. This design introduced an optimized data streaming method, which was used for peripheral component interconnect (PCI) host bridge (PHB), to control PCI data stream between PCI bus and north-bridge. This method utilized self-suited write merging, in-time write data collecting and repackaging, two stage read data preloading with static resource consumption policies. The experiment results show that the implemented north-bridge performs well and fully utilizes PCI bus's bandwidth. Compared with other similar systems, this north-bridge performs better in processing direct memory access (DMA) read and renewing PCI graphic card's memory. |
| |
| Keywords: | north-bridge Godson chip set peripheral component interconnect (PCI) PCI host bridge (PHB) |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
