An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack |
| |
| Affiliation: | 1. Department of Mechanical and Materials Engineering, Queen’s University, Canada;2. State Key Laboratory of Mechanical Transmission, Chongqing University, China;1. Mechanical Engineering Department, School of Engineering, Indian Institute of Technology, Indore, India;2. Mechanical Engineering Department, SGSITS, Indore, India;1. Division of Operation, Maintenance and Acoustics, Lulea University of Technology, Sweden;2. Mechanical Engineering Department, College of Engineering, University of Mosul, Iraq;3. Division of Product and Production Development, Lulea University of Technology, Sweden |
| |
| Abstract: | When a tooth crack failure occurs, the vibration response characteristics caused by the change of time-varying mesh stiffness play an important role in crack fault diagnosis. In this paper, an improved time-varying mesh stiffness algorithm is presented. A coupled lateral and torsional vibration dynamic model is used to simulate the vibration response of gear-rotor system with tooth crack. The effects of geometric transmission error (GTE), bearing stiffness, and gear mesh stiffness on the dynamic model are analyzed. The simulation results show that the gear dynamic response is periodic impulses due to the periodic sudden change of time varying mesh stiffness. When the cracked tooth comes in contact, the impulse amplitude will increase as a result of reductions of mesh stiffness. Amplitude modulation phenomenon caused by GTE can be found in the simulation signal. The lateral–torsional coupling frequency increases greatly within certain limits and thereafter reaches a constant while the lateral natural frequency nearly remains constant as the gear mesh stiffness increases. Finally, an experiment was conducted on a test bench with 2 mm root crack fault. The results of experiment agree well with those obtained by simulation. The proposed method improves the accuracy of using potential energy method to calculate the time-varying mesh stiffness and expounds the vibration mechanism of gear-rotor system with tooth crack failure. |
| |
| Keywords: | Tooth crack failure Time-varying mesh stiffness Dynamic model Vibration mechanism |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
