| 用较少的刀具实现弧齿锥齿轮的双面法加工 |
| |
| 引用本文： | 张华,邓效忠.用较少的刀具实现弧齿锥齿轮的双面法加工[J].矿山机械,2003,31(3):51-52. |
| |
| 作者姓名： | 张华 邓效忠 |
| |
| 作者单位： | 河南科技大学机电工程系，河南科技大学机电工程系 河南 洛阳 471003，河南 洛阳 471003 |
| |
| 摘 要： | 在弧卤锥齿轮的设计中考虑切齿加工,通过对轮坯修正,以及相应的机床调整,提出一种新的加工方法——单号双面法。利用此方法,用较少的刀具规格,可以将弧齿锥齿轮大轮的凸凹面一次性切出,提高制齿效率。
|
| 关 键 词： | 刀具 弧齿锥齿轮 双面法加工 刀盘 齿根 |
Double-surfaces Method for Processing Spiral Bevel Gear with Few Format Cutters |
| |
| Zhang Hua et al..Double-surfaces Method for Processing Spiral Bevel Gear with Few Format Cutters[J].Mining & Processing Equipment,2003,31(3):51-52. |
| |
| Authors: | Zhang Hua |
| |
| Affiliation: | Zhang Hua et al. |
| |
| Abstract: | In view of the process of spiral bevel gear, the paper puts forward a newprocess method-single number double-surfaces. By use of the method,the bigger one's convex and concave of spiral bevel gears can be cut out one-through with few format of cutters, which can improve the efficiency of processing the gears. |
| |
| Keywords: | Spiral bevel gear Gear cutting Single number double surfaces method |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
