| GM T 熔融浸渍中熔体在玻纤毡中的流动 |
| |
| 引用本文： | 李铭,黄进,戴干策.GM T 熔融浸渍中熔体在玻纤毡中的流动[J].复合材料学报,2000,17(3):28-32. |
| |
| 作者姓名： | 李铭 黄进 戴干策 |
| |
| 作者单位： | 华东理工大学聚合物加工研究室, 上海 200237 |
| |
| 基金项目： | 国家“8 63”计划资助项目! ( 715- 0 12 - 0 0 1) |
| |
| 摘 要： | 通过改装毛细管流变仪建立了专门的实验装置, 研究高温高压下熔体在纤维床层中的流动行为。采用一维恒压流动实验分别测量了不饱和及饱和流动状况下玻纤毡厚度方向聚丙烯熔体的渗透率, 考察了玻纤毡空隙率、单丝直径、针刺等几何结构对渗透率的影响。根据实验结果进一步讨论了GM T 片材熔融浸渍过程中的气泡形成以及浸渍工艺参数的选择。
|
| 关 键 词： | 玻纤毡增强热塑性复合材料 熔融浸渍 渗透率 熔体流动 玻纤毡 |
| 收稿时间： | 1998-12-25 |
| 修稿时间： | 1999-05-17 |
MELT FLOW THROUGH GLASS FIBER MAT DURING GMT MELT IMPREGNATIONMELT FLOW THROUGH GLASS FIBER MAT DURING GMT MELT IMPREGNATION |
| |
| LI Ming,HUANG Jin,DAI Gan-ce.MELT FLOW THROUGH GLASS FIBER MAT DURING GMT MELT IMPREGNATIONMELT FLOW THROUGH GLASS FIBER MAT DURING GMT MELT IMPREGNATION[J].Acta Materiae Compositae Sinica,2000,17(3):28-32. |
| |
| Authors: | LI Ming HUANG Jin DAI Gan-ce |
| |
| Affiliation: | Polymer Processing Laboratory, East China University of Science and Technology, Shanghai 200237, China |
| |
| Abstract: | A special apparatus was constructed by modifying capillary rheometer to study polymer melt flow behavior through fiber beds. One dimension constant pressure flow experiments were carried out to measure the transverse permeability of two glass fiber mats in both unsaturated and saturated flow using PP melt as permeant. The effect of mat architecture on permeability was investigated including mat porosity, fiber diameter and needles. Furthermore, selection of impregnation parameters in GMT melt impregnation was discussed according to the experimental results. |
| |
| Keywords: | GMT melt impregnation permeability melt flow glass fiber mat |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载全文 |
