| 凸凹模受力模型与有限元分析 |
| |
| 引用本文： | 杨波,刘渝.凸凹模受力模型与有限元分析[J].模具工业,2007,33(9):23-27. |
| |
| 作者姓名： | 杨波 刘渝 |
| |
| 作者单位： | 西华大学,机械工程与自动化学院,四川,成都,610039 |
| |
| 摘 要： | 通过对板料成形时的受力分析,建立了凸凹模在拉深过程中的受力模型,完成了对凸凹模的有限元数值分析,得到了凸凹模的应力和变形分布情况。对板料进行强度、刚度校核,得到了随板料厚度的变化凸凹模孔口所受的压力、凸凹模的最大应力和位移的变化规律。可为模具结构的设计、模具材料的选择提供依据。
|
| 关 键 词： | 落料拉深 复合模 有限元 强度校核 |
| 文章编号： | 1001-2168（2007）09-0023-05 |
| 修稿时间： | 2007-03-22 |
Strained model of punch and die plate and related finite element analysis |
| |
| YANG Bo,LIU Yu.Strained model of punch and die plate and related finite element analysis[J].Die & Mould Industry,2007,33(9):23-27. |
| |
| Authors: | YANG Bo LIU Yu |
| |
| Affiliation: | School of Mechanical Engineering and Automation,Xihua University,Chengdu,Sichuan 610039,China |
| |
| Abstract: | According to an analysis on the forming stress of sheet metal,a strained model of punch and die in the drawing process was established.The finite element numerical simulation on the punch and die was finished and the distribution of stress and strain of the punch and die plate was obtained.Then a strength and rigidity check was carried out.The pressure placed on the opening of punch and die,the maximum stress and displacement of the punch and die plate changes while the sheet material thickness varies.Its variation rule was got out. |
| |
| Keywords: | blanking and drawing compound die finite element method strength check |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
