| 开沟机离合器操纵机构的虚拟样机设计与分析 |
| |
| 引用本文： | 杨文敏,谢方平. 开沟机离合器操纵机构的虚拟样机设计与分析[J]. 机械研究与应用, 2012, 0(4): 143-145 |
| |
| 作者姓名： | 杨文敏 谢方平 |
| |
| 作者单位： | [1]湖南农业大学工学院,湖南长沙410128 [2]湖南省现代农业装备工程技术研究中心,湖南长沙410128 |
| |
| 基金项目： | 湖南省教育厅项目（09C513）;湖南省教育厅项目（10A055） |
| |
| 摘 要： | 为实现离合器工作要求,离合器操纵机构采用两个双摇杆机构串联而成的组合机构。用解析法对操纵机构进行设计和分析。根据安装要求和分离角等限制条件,采用Solidworks软件的草图尺寸驱动功能求出其合理解。该方法具有简单、直观、方便、精确等特点。用ADAMS软件建立其动力学模型,进行仿真分析,验证分离角、离合操纵力满足工作要求。
|
| 关 键 词： | 操纵机构 离合器 开沟机 虚拟样机 |
Virtual prototype design and analysis for clutch-operating mechanism of trenching machine |
| |
| Yang Wen-min,Xie Fang-ping. Virtual prototype design and analysis for clutch-operating mechanism of trenching machine[J]. Mechanical Research & Application, 2012, 0(4): 143-145 |
| |
| Authors: | Yang Wen-min Xie Fang-ping |
| |
| Affiliation: | 2 ( 1. College of engineering,Hunan agriculture university , Changsha Hunan 410128, China; 2. Hunan provincial engineering technology research center for modern agricultural equipment, Changsha Hunan 410128, China) |
| |
| Abstract: | In order to realize functional objective, the clutch-operating mechanism is composed of two double rocker mecha- nism. The operating mechanism is design by analytic method. According to the installation requirements and the constraints, it gets a reasonable result based on the sketch dimension drive function of Solidworks software. The dynamics model is built by ADAMS software. The separation angles and control force is proved to be reasonable and the functional requirements of the clutch is fulfilled. |
| |
| Keywords: | operating mechanism clutch trenching machine virtual prototype |
| 本文献已被 CNKI 维普 等数据库收录！ |
