| 一次性加工完成大批量高精度深孔的研究 |
| |
| 引用本文： | 杨生元,朱林,张凯.一次性加工完成大批量高精度深孔的研究[J].机械研究与应用,2012(4):93-94,97. |
| |
| 作者姓名： | 杨生元 朱林 张凯 |
| |
| 作者单位： | [1]西安石油大学,陕西西安710065 [2]兰州兰石重型装备股份有限公司甘肃兰州730000,陕西西安710065 |
| |
| 摘 要： | 通过对深孔加工的工艺分析,从影响加工精度的因素入手,通过对加工参数的大量实验和计算,最后一次性完成对25mm±0.02mm、孔深为300mm、孔数为2500、材质为0Cr18Ni10Ti大批量高精度深孔加工。
|
| 关 键 词： | 大批量高精度深孔 下锥板 深孔加工 |
Research on a one-time processing of large quantities of high-precision deep hole |
| |
| Yang Sheng-yuan,＇,Zhu Lin,Zhang Kai.Research on a one-time processing of large quantities of high-precision deep hole[J].Mechanical Research & Application,2012(4):93-94,97. |
| |
| Authors: | Yang Sheng-yuan ＇ Zhu Lin Zhang Kai |
| |
| Affiliation: | 2 (1. School of mechanical engineering, Xi＇an Shiyou university, Xi＇an Shaanxi 710065, China; (2. Stone heavy equipment Co. , Ltd, Lanzhou refining and chemical company, Lanzhou Gansu 730000, China) |
| |
| Abstract: | Through analyzing the technology of deep hole processing, starting from the factors which affect the machining accu- racy, based on the processing parameters of the experiment and calculation, the hole with the geometric parameters of 25mm＋ 0.02mm, the 300mm depth, the 2500 holes, the material of 0Cr18Nil0Ti, is processed by the large quantities of high-preci- sion deep in one time. |
| |
| Keywords: | large quantities of high-precision deep hole under the cone-plate deep hole |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
