| 不饱和聚酯光敏预聚物的合成 |
| |
| 引用本文： | 陈建山,罗洁,周钢,滕菁,左光汉. 不饱和聚酯光敏预聚物的合成[J]. 精细石油化工, 2005, 0(2): 28-31 |
| |
| 作者姓名： | 陈建山 罗洁 周钢 滕菁 左光汉 |
| |
| 作者单位： | 中南林学院工业学院,湖南,长沙,410004;合肥工业大学化学工程学院,安徽,合肥,230009 |
| |
| 基金项目： | 中南林学院青年科技基金重点资助项目(紫外光固化涂料的研究,04003A)。 |
| |
| 摘 要： | 采用熔融缩聚法制备了光敏不饱和聚酯树脂(UPR),对其进行了红外表征,研究了酸值与反应时间的关系及酸醇比等对UPR玻璃化温度(Tg)的影响,讨论了第一阶段反应时间对光敏不饱和聚酯合成反应的影响。得到的优化工艺条件为:酸/醇(摩尔比)=2.0:1.95,己二酸含量为10%(对酸的摩尔分数),制得的树脂Tg为54℃,可满足紫外光固化粉末涂料的要求。
|
| 关 键 词： | 紫外光固化 不饱和聚酯 酸值 玻璃化温度 |
| 修稿时间： | 2004-10-08 |
STUDY OF SYNTHESIS OF UV-CURABLE UNSATURATED POLYESTER RESIN |
| |
| Chen Jianshan,Luo Jie,Zhou Gang,Teng Jing,Zuo Guanghan. STUDY OF SYNTHESIS OF UV-CURABLE UNSATURATED POLYESTER RESIN[J]. Speciality Petrochemicals, 2005, 0(2): 28-31 |
| |
| Authors: | Chen Jianshan Luo Jie Zhou Gang Teng Jing Zuo Guanghan |
| |
| Abstract: | UV-curable unsaturated polyester resin was prepared by melt polycondensation. The product was indentified by IR spectra, and the realation between acid value and reaction time and the effects of the ratio of alcohols to acids, etc. on the UPR glass transition temperature were investigated, as well as the 1st stage reaction time were discussed. The optimal technological conditions were obtained as follows: the molar ratio of acid to alcohols is 2. 0∶1. 95, the content of adipic acid is 10% (to acid). The product's Tg is 54℃, and suitable for powder coatings. |
| |
| Keywords: | UV-curing unsaturated polyester acid value glass transtition temperature |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
