|
|||||
|
|
| 基于正交试验法的切削参数优化研究 | |
| 引用本文： | 李学光,王惠伟,张树仁,王军,苗立琴,刘大辉.基于正交试验法的切削参数优化研究[J].机床与液压,2011,39(8). |
| 作者姓名： | 李学光 王惠伟 张树仁 王军 苗立琴 刘大辉 |
| 作者单位： | 1. 长春理工大学机电工程学院,吉林,长春,130022 2. 长春理工大学机电工程学院,吉林,长春,130022;中国兵器工业集团第五五研究所数字化研究室,吉林,长春,130012 3. 中国兵器工业集团第五五研究所数字化研究室,吉林,长春,130012 |
| 基金项目： | 长春理工大学科研基金项目(202/00347) |
| 摘 要： | 在数控加工中,切削三要素对加工质量的影响很大,在加工前应找到满足零件质量要求的切削三要素的最佳组合。采用正交试验法分析切削三要素对表面粗糙度的影响,该试验是一个3因素3水平单指标的试验,使用方差分析法进行分析。通过试验,得到了三要素对表面粗糙度的影响规律以及满足加工要求的三要素的最优组合。 |
| 关 键 词： | 表面粗糙度 切削三要素 正交试验 |
Optimization Research of Cutting Parameters Based on Orthogonal Experiment Method |
|
| LI Xueguang,WANG Huiwei,ZHANG Shuren,WANG Jun,MIAO Liqin,LIU Dahui.Optimization Research of Cutting Parameters Based on Orthogonal Experiment Method[J].Machine Tool & Hydraulics,2011,39(8). | |
| Authors: | LI Xueguang WANG Huiwei ZHANG Shuren WANG Jun MIAO Liqin LIU Dahui |
| Affiliation: | LI Xueguang1,WANG Huiwei1,ZHANG Shuren1,WANG Jun1,MIAO Liqin1,2,LIU Dahui2(1.College of Mechanical and Electrical Engineering,Changchun University of Science and Technology,Changchun Jilin 130022,China,2.Department of Numerical Design & Manufacture,Changchun Research Institute of Equipment and Technology,Changchun Jilin130012,China) |
| Abstract: | The three cutting parameters are important factors to the machining quality.Before machining,the optimized combination of the three cutting parameters should be found.Orthogonal experiment method was used to analyze the effect of cutting parameters to surface roughness.It was a three factors and levels experiment and variance method was used to analyze experimental results.Through the experiments,the rule that effect of cutting parameters to surface roughness was gotten,and the optimized combination of cutt... |
| Keywords: | Surface roughness Three cutting parameters Orthogonal experiment |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |