| 确定循环水泵站运行工况的方法比较 |
| |
| 引用本文： | 刘金祥,张军.确定循环水泵站运行工况的方法比较[J].流体机械,2002,30(12):34-36. |
| |
| 作者姓名： | 刘金祥 张军 |
| |
| 作者单位： | 南京工业大学,江苏南京,210009 |
| |
| 摘 要： | 介绍了三种确定切削后水泵的叶轮外径和Q－H特性曲线的方法，并对其计算结果进行了比较和讨论。
|
| 关 键 词： | 循环水泵站 离心泵 切削叶轮 运行工况 |
| 文章编号： | 1005-0329(2002)12-0034-03 |
| 修稿时间： | 2002年5月6日 |
Methods Comparison of Determination the Operating Mode of the Recycling Water Pump Station |
| |
| Liu Jinxiang,Zhang Jun.Methods Comparison of Determination the Operating Mode of the Recycling Water Pump Station[J].Fluid Machinery,2002,30(12):34-36. |
| |
| Authors: | Liu Jinxiang Zhang Jun |
| |
| Affiliation: | Liu Jinxiang Zhang Jun |
| |
| Abstract: | Three kinds of method to determine the cutting impeller diameter and Q-H curves were introduced in this paper. The calculated results were also discussed. |
| |
| Keywords: | recycling water pump station centrifugal pump cutting-impeller operating mode |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
