| 模具型腔的几种精整加工方法的对比分析 |
| |
| 引用本文： | 张文玉. 模具型腔的几种精整加工方法的对比分析[J]. 锻压技术, 2005, 30(4): 42-45 |
| |
| 作者姓名： | 张文玉 |
| |
| 作者单位： | 湖南大学,衡阳分校,湖南,衡阳,421101 |
| |
| 摘 要： | 通过对模具型腔工作面的几种精整加工方法的对比分析，研究和探讨如何提高模具型腔工作面质量的方法，并提出精整加工的发展方向。
|
| 关 键 词： | 型腔工作面 精整加工 对比分析 发展方向 |
| 文章编号： | 1000-3940（2005）04-0042-04 |
| 收稿时间： | 2004-07-29 |
| 修稿时间： | 2004-07-29 |
Comparing analysis of several methods of mould cavity finished machining |
| |
| ZHANG Wen-yu. Comparing analysis of several methods of mould cavity finished machining[J]. Forging & Stamping Technology, 2005, 30(4): 42-45 |
| |
| Authors: | ZHANG Wen-yu |
| |
| Abstract: | The paper analyzes contrastively several methods for the finished machining of mould cavity working surface, studies and explores the methods to improve the quality of working surface of mould cavity, and puts forward the development direction of mould cavity finished machining. |
| |
| Keywords: | working surface of mould cavity finished machining comparing analysis development direction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
